X Clearance Plane (Setting 93)

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

To set a value for the X clearance plane (Setting 93):

  1. Place the control in MDI mode.
  2. Select the longest tool that protrudes furthest on the X-axis plane in the turret.
  3. Place the control in Jog mode.
  4. Select the X-axis for jogging and move the X-axis clear of the tailstock.
  5. Select the tailstock (B-axis) for jogging and move the tailstock beneath the selected tool.
  6. Select the X-axis and approach the tailstock until the tool and tailstock are about 0.25" apart.
  7. Back the tool away in the X Axis a small amount then enter the value for Setting 93.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.