Work Offsets with the RJH

Next Generation Control Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

This section describes the controls you use on the RJH to set work offsets. For more information about the process of setting work offsets, refer to Setting Part Zero Offsets

To access this function on the RJH, press OFFSET on the control pendant and select the Work Offsets page, or select WORK OFFSETS from the RJH operation mode menu refer to RJH Menu.

RJH Work Offsets Screen Example

  • Use the LEFT and RIGHT cursor arrow keys to select the jog rate.
  • To change the work offset number, press the WORKN function key and use the pulse jog knob to select a new offset number. Press the ENTER function key to set the new offset.
  • Use the jog knobs and the axis selector knob to move the axes. When you reach the offset position in an axis, press the SET function key to record the offset position.
  • To adjust an offset value:
    1. Press the ADJST function key.
    2. Use the pulse knob to change the value (positive or negative) to add to the offset.
    3. Press the ENTER function key.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.