Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

To access the value of a parameter, copy the number of that parameter into variable #6996. The value of that parameter is available in macro variable #6998, as shown:

% #6996=601 (Specify parameter 601) ; #100=#6998 (Copy the value of parameter 601 to variable #100) ; %

To access a specific parameter bit, copy the parameter number into variable 6996 and the bit number to macro variable 6997. The value of that parameter bit is available in macro variable 6999, as shown:

% #6996=57 (Specify parameter 57) ; #6997=0 (Specify bit zero) ; #100=#6999 (Copy parameter 57 bit 0 to variable #100) ; %
note: Parameter bits are numbered 0 through 31. 32-bit parameters are formatted, on-screen, with bit 0 at the top-left, and bit 31 at the bottom-right.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.