Screen Capture

Classic Control - Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

The control can capture and save an image of the current screen to an attached USB device or the hard drive. If no USB device is connected and the machine does not have a hard drive, no image will be saved.

  1. If you want to save the screen capture under a particular filename, type it first. The control adds the *.bmp file extension automatically.
    note: If you do not specify a filename, the control will use the default filename snapshot.bmp. This will overwrite any screen capture taken previously with the default name. Be sure to specify a filename each time if you want to save a series of screen captures.
  2. Press SHIFT.
  3. Press F1.

The screen capture is saved to your USB device or the machine’s hard drive, and the control displays the message Snapshot saved to HDD/USB when the process is finished.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.