Run Part

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

To watch Live Image screen while a part is machined:

Live Image Screen with Stock Drawn

Live Image Feature List


When the Bar Feeder reaches G105, the part is refreshed.

Live Image Tool working the Part


Data displayed on the screen while the program is running includes: program, main spindle, machine position, and timers and counters.

  1. Press MEMORY, then CURRENT COMMANDS, and then PAGE UP. When the screen appears, press ORIGIN to display the Live Image screen with stock drawn. Press F2 to enter ZOOM mode. Use PAGE UP and PAGE DOWN to zoom the display and the direction keys to move the display. Press ENTER when the desired zoom is achieved. Press ORIGIN to return to zero zoom, or press F4 to auto zoom to the part. Press F1 to save a zoom and press F3 to load a zoom setting. Press HELP Select Help Active Window Commands for a pop-up menu with a list of Live Image features.
  2. Press CYCLE START. A warning pops up on the screen. Press CYCLE START again to run the program. When a program is running and tool data has been set up, the Live Image screen shows the tool working the part in real time as the program runs.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.