Restoring a Full Machine Backup

Next Generation Control Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Table of Contents

This procedure tells you how to restore your machine data from the backup on a USB memory device.

  1. Insert the USB memory device with the backup files into the USB port on the right side of the control pendant.
  2. Navigate to USB in the Device Manager.
  4. Open the directory that contains the backup you want to restore.
  5. Highlight the HaasBackup zip file to load.
  6. Press F4.
  7. Select Restore Machine and press ENTER.

    The Restore Machine pop-up window shows what types of data can be selected to restore.

    Restore Machine Pop-up menu (example shows an all data backup)

  8. Highlight the data to restore and press ENTER to apply a check mark. Press F2 to select all data. Press F3 to clear all selectors.
    warning: User data and memory are erased prior to a restore.
  9. Press F4.

    Each data area restored is checked-off and initialized.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.