Find Part of a Code in a Program

To find part of a code in a program, type a G-code, M-code, or the code that you want to find. Push the UP arrow to find the code above the code selection, or push the DOWN arrow to find the code below the code selection.

The control selects the first code that it finds.

Do these steps again to find where the code occurs again.

note: You can find a full G-code or M-code, or part of a code. For example, to find the next M-code in your program, type M and push Down.

When in edit mode, push F1 to start the Find Text, Find Again and Find and Replace functions of the advanced editor.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.