Position Display Axis Selection

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Use this function to change the axis positions that show in the display.

  1. With a position display active, press F2. The Axis Selection pop-up menu appears.

    The Axis Selection Pop-up Menu

  2. Press the LEFT, RIGHT, UP, or DOWN cursor arrow keys to highlight an axis letter.
  3. Press ENTER to place a check mark next to the highlighted axis letter. This mark means that you want to include that axis letter in the position display.

    The X and Y Axes Selected in the Axis Selection Menu

  4. Repeat steps 2 and 3 until you have selected all of the axes you want to display.
  5. Press F2. The position display updates with your selected axes.

    The Updated Position Display

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.