Operation (M codes and Settings)

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

M154 engages the C-Axis and M155 disengages the C-Axis.

Setting 102 - Diameter is used to calculate the feed rate.

The lathe automatically disengages the spindle brake when you command the C-Axis to move and to reengage it afterwards if the M codes are still active.

C-Axis incremental moves are possible using the H address code as shown in this example:

G0 C90. (C-Axis moves to 90. deg.) ; H-10. (C-Axis moves to 80. deg. from the previous 90 deg position) ;

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.