Offsets Display

Classic Control - Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

There are two offset tables, the Program Tool Offsets table and the Active Work Offset table. Depending on the mode, these tables may appear in two separate display panes, or they may share a pane; press OFFSET to toggle between tables.

Offset Tables

Name Function
Program Tool Offsets This table displays tool numbers and tool length geometry.
Active Work Offset This table displays the values entered so that each tool knows where the part is located.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.