Lathe Orientation

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

These figures show some of the standard and optional features of your Haas lathe. Some of the features shown are highlighted in their appropriate sections. Note that these figures are representative only; your machine’s appearance may vary depending on the model and installed options.

Lathe Features (front view)

  1. 2X High Intensity Lights (Optional)
  2. Work Light (2X)
  3. Chip Conveyor (Optional)
  4. Oil Drain Container
  5. Chip Container
  6. Air Gun
  7. Foot Pedal
  8. Parts Catcher (Optional)

9. Hydraulic Power Unit (HPU)

10. Coolant Collector

11. Spindle Motor

12. Servo Auto Door (Optional)

A. Control Pendant

B. Minimal Lube Panel Assembly

C. Coolant Tank

Lathe Features (front view with covers removed)

  1. Spindle Motor

  2. Tool Turret Assembly

  3. Tailstock (Optional)

  4. Parts Catcher (Optional)
  5. LTP Arm (Optional)

6. Chuck

7. C-Axis Drive Assembly (Optional)

8. Hydraulic Power Unit (HPU)

9. Spindle Head Assembly

A Control Cabinet

B Control Cabinet Side Panel

Lathe Features (front view) Detail A - Control Pendant with Cabinet

  1. Work Beacon

  2. Clipboard

  3. Operator’s Manual and Assembly Data (stored behind pendant)

  4. Side panel Controls

  5. Tool Holder (also shown, tool holder for thin pendant)

  6. Storage Tray

  7. G- and M-code Reference List

  8. Remote Jog Handle

Lubrication Panel Example

  1. Grease Reservoir Assembly

  2. Spindle Air and Pump Control

  3. Spindle Oil Tank Pump Assembly

  4. Spindle Pump Assembly

  5. Main Regulator Air Manifold Assembly

  6. Water Separator Assembly

Lathe Features (3/4 side view) Detail C - Coolant Tank Assembly

  1. Standard Coolant Pump

  2. High-Pressure Coolant Pump (Optional)

  3. Coolant Level Sensor

  4. Chip Strainer

  5. Strainer Basket

Toolroom Lathe (front view)

  1. Spindle assembly
  2. Air Gun
  3. Control Pendant
  4. Coolant Tank
  5. Tailstock

Toolroom Lathe (front view, doors removed)

  1. Spindle Nose
  2. Worklight
  3. Cross Slide (tool post / turret not shown)
  4. Coolant Tank
  5. Tailstock

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.