G54 Work Offsets

Classic Control - Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Work Offsets define where a work piece is located on the table. Work Offsets available are G54-G59, G110-G129, and G154 P1-P99. G110-G129 and G154 P1-P20 refer to the same Work Offsets. A useful feature is to set up multiple work pieces on the table and machining multiple parts in one machine cycle. This accomplished by assigning each work piece to a different Work Offset. For more information, reference the G-code section of this manual. Below is an example of machining multiple parts in one cycle. The program uses M97 Local Sub-Program Call to the cutting operation.

% O40005 (Work offsets ex-prog) ; (G54 X0 Y0 is center left of part) ; (Z0 is on top of the part) ; (T1 is a drill) ; (BEGIN PREPARATION BLOCKS) ; T1 M06 (Select tool 1) ; G00 G90 G40 G49 G54(Safe startup) ; X0 Y0 ; (Move to first work coordinate position-G54) ; S1000 M03 (Spindle on CW) ; G43 H01 Z0.1 (Tool offset 1 on) ; M08 (Coolant on) ; (BEGIN CUTTING BLOCKS) ; M97 P1000 (Call local Subroutine) ; G00 Z3. (Rapid retract) ; G90 G110 G17 G40 G80 X0. Y0. ; (Move to second work coordinate position-G110) ; M97 P1000 (Call local Subroutine) ; G00 Z3. (Rapid Retract) ; G90 G154 P22 G17 G40 G80 X0. Y0. ; (Move to third work coordinate position-G154 P22) ; M97 P1000 (Call local Subroutine) ; (BEGIN COMPLETION BLOCKS) ; G00 Z0.1 M09 (Rapid retract, Coolant off) ; G53 G49 Z0 M05 (Z home, Spindle off) ; G53 Y0 (Y home) ; M30 (End program) ; N1000 (Local subroutine) ; G81 F41.6 X1. Y2. Z-1.25 R0.1 (Begin G81) ; (1st hole) ; X2. Y2. (2nd hole) ; G80 (Cancel G81) ; M99 ; %

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.