File Name Convention

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Files intended for transfer to and from the machine control should be named with an (8)-character filename and (3)-character extension; for example: program1.txt. Some CAD/CAM programs use “.NC” as a file extension, which is also acceptable.

File extensions are for the benefit of PC applications; the CNC control ignores them. You can name program files with no extension, but some PC applications may not recognize the file without the extension.

Files developed in the control are named with the letter “O” followed by 5 digits. For example, O12345.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.