File Duplication

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

To duplicate a file:

  1. Press LIST PROGRAM to access the Device Manager.
  2. Select the Memory tab.
  3. Cursor to the program to duplicate.
  4. Type a new program name (Onnnnn) and press F2.

    The highlighted program is duplicated with the new name, and it is made the active program.

  5. To duplicate a program to a different device, highlight the program and press  F2. Do not type a program number.

    A popup menu lists destination devices.

  6. Select a device and press ENTER to duplicate the file.
  7. To copy multiple files, press ENTER to place a check mark at each file name.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.