Display Modes (FNC)

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Three display modes are available. To switch between display modes:

  1. Press F1 for the popup File menu.
  2. Use the Change View command.
  3. Press ENTER.
  4. List displays the current FNC program alongside the tabbed LIST PROG menu.
  5. Main displays one program at a time in a tabbed pane (switch between tabs using the Swap Programs command in the File menu or by pressing F4).
  6. Split displays the current FNC program on the left and the currently open programs in a tabbed pane on the right. Toggle the active pane using the Switch to Left or Right Side in the File menu or by pressing EDIT. When the tabbed pane is active, switch between tabs using the Swap Programs command in the F1 popup File menu or by pressing F4.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.