Disabling 4th and 5th Axes

Classic Control - Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

To disable 4th and 5th axes:

Save Rotary Parameter Set

  1. Turn off Setting 30 for the 4th axis and/or 78 for the 5th axis when you remove the rotary unit from the machine.

    When you turn off Setting 30 or 78, a prompt appears to save the parameter set.

  2. caution: Do not connect or disconnect any cables with the control on.
    Select a file using the up and down cursor arrows and press ENTER to confirm.

    The name of the currently selected parameter set appears in the box. You can change this filename to save a custom parameter set.

  3. The machine generates an alarm if these settings are not turned off when the unit is removed.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.