Circle Sub-tab

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

This calculator page will help solve a circle problem.

  1. Use the UP and DOWN cursor arrows to select the field for the value to be entered.
  2. Type the center, radius, angles, start and end points. Press ENTER after each entry.

When enough data has been entered, the control solves for the circular motion and displays the rest of the values. Press ENTER in the DIRECTION field to change CW/CCW. The control also lists alternate formats that such a move could be programmed with a G02 or G03. Select the format you want and press F3 to import the highlighted line into the program being edited.

Calculator Circle Example

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.