Z- and B-Axis below the X Clearance Plane (Setting 94)

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

To set a separation for Z- and B-Axis below the X Clearance Plane (Setting 94):

  1. Press ZERO RETURN and HOME G28.
  2. Select the X-axis and move the turret in front of the tailstock quill tip.
  3. Move the Z-axis so that the rear of the tool turret is within about 0.25" of the tailstock quill tip.
  4. Enter the value in the Z-Axis Machine Position display for Setting 94.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.