YASNAC Coordinate System

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

T-codes have the format Tnnoo, nn has different meanings depending on whether the T-code is inside or outside a G50 block. The oo value specifies the tool wear from 1 to 50. If tool nose compensation is used, 50+oo specifies the tool shift index for radius, taper, and tip. If oo+00, no tool wear or tool nose compensations are applied.

Outside a G50 block, nn specifies the tool number from 1 to the maximum number of stations on the turret.

Inside a G50 block, nn specifies the tool shift index from 51 to 100. The tool shift X and Z values are subtracted from the work offsets and thus are of opposite sign than the tool geometries used in the FANUC coordinate system.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.