Work Offsets

Classic Control - Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Macro expressions can read and set all work offsets. This lets you preset coordinates to approximate locations, or set coordinates to values based upon the results of skip signal locations and calculations. When any of the offsets are read, the interpretation look-ahead queue is stopped until that block is executed.

#5201- #5206 G52 X, Y, Z, A, B, C OFFSET VALUES
#5221- #5226 G54 X, Y, Z, A, B, C OFFSET VALUES
#5241- #5246 G55 X, Y, Z, A, B, C OFFSET VALUES
#5261- #5266 G56 X, Y, Z, A, B, C OFFSET VALUES
#5281- #5286 G57 X, Y, Z, A, B, C OFFSET VALUES
#5301- #5306 G58 X, Y, Z, A, B, C OFFSET VALUES
#5321- #5326 G59X, Y, Z, A, B, C OFFSET VALUES
#7001- #7006 G110 X, Y, Z, A, B, C OFFSET VALUES
#7021-#7026 (#14021-#14026) G111 (G154 P2) additional work offsets
#7041-#7046 (#14041-#14046) G112 (G154 P3) additional work offsets
#7061-#7066 (#14061-#14066) G113 (G154 P4) additional work offsets
#7081-#7086 (#14081-#14086) G114 (G154 P5) additional work offsets
#7101-#7106 (#14101-#14106) G115 (G154 P6) additional work offsets
#7121-#7126 (#14121-#14126) G116 (G154 P7) additional work offsets
#7141-#7146 (#14141-#14146) G117 (G154 P8) additional work offsets
#7161-#7166 (#14161-#14166) G118 (G154 P9) additional work offsets
#7181-#7186 (#14181-#14186) G119 (G154 P10) additional work offsets
#7201-#7206 (#14201-#14206) G120 (G154 P11) additional work offsets
#7221-#7226 (#14221-#14221) G121 (G154 P12) additional work offsets
#7241-#7246 (#14241-#14246) G122 (G154 P13) additional work offsets
#7261-#7266 (#14261-#14266) G123 (G154 P14) additional work offsets
#7281-#7286 (#14281-#14286) G124 (G154 P15) additional work offsets
#7301-#7306 (#14301-#14306) G125 (G154 P16) additional work offsets
#7321-#7326 (#14321-#14326) G126 (G154 P17) additional work offsets
#7341-#7346 (#14341-#14346) G127 (G154 P18) additional work offsets
#7361-#7366 (#14361-#14366) G128 (G154 P19) additional work offsets
#7381-#7386 (#14381-#14386) G129 (G154 P20) additional work offsets
#7381- #7386 G129 X, Y, Z, A, B, C OFFSET VALUES

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback