Toolpath Selection

Classic Control - Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

This step applies a toolpath to a particular chained group.

DXF IPS Recorder Menu

  1. Select the group and press F3 to choose a toolpath.
  2. Use the jog handle to bisect an edge of the part feature. The control uses this as an entry point for the tool.

    After you select a toolpath, you see the IPS (Intuitive Programming System) template for that path.

    Most IPS templates are filled with reasonable defaults based on the tools and materials that you set up.

  3. Press F4 to save the toolpath once the template is completed. You can add the IPS G-code segment to a program, or create a new program. Press EDIT to return to the DXF import feature to create the next toolpath.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback