Tool Offsets with the RJH

Next Generation Control Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

This section describes the controls you use on the RJH to set tool offsets. More information is available about the process of setting tool offsets.

To access this function on the RJH, press OFFSET on the control pendant and select the Tool Offsets page, or select TOOL OFFSETS from the RJH operation mode menu (refer to  RJH Operation).

RJH Tool Offsets Screen Example

  • Use the LEFT and RIGHT cursor arrow keys to select the jog rate.
  • Use the UP and DOWN cursor arrow keys to highlight menu options.
  • Press the NEXT function key to change to the next tool.
  • To change the tool offset, highlight the TOOL OFFSET field and use the pulse jog knob to change the value.
  • Use the jog knobs and axis selector knob to touch off the tool. Press the SETL function key to record the tool length.
  • To adjust the tool length, for example, if you want to subtract from the tool length the thickness of the paper you used to touch off the tool:
    1. Press the ADJST function key.
    2. Use the pulse knob to change the value (positive or negative) to add to the tool length.
    3. Press the ENTER function key.
  • If your machine has the Programmable Coolant option, you can adjust the spigot position for the tool. Highlight the COOLANT POS field and use the pulse jog knob to change the value. You can use the M08 function key to turn on the coolant and test the spigot position. Press that function key again to turn off the coolant.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback