Tailstock Hold Point Creation (Setting 107)

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

To set the Tailstock Hold Point (Setting 107):

  1. Select the B Axis in Jog mode.
  2. Jog the tailstock to the workpiece, until the center contacts the workpiece surface.
  3. Add 0.25" (6 mm) to the value in the Machine Position display for the B Axis and record this value.
  4. Enter the value from step 3 in Setting 107.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback