Tabbed Menu Basic Navigation

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Tabbed menus are used in several control functions, such as Parameters, Settings, Help, List Programs, and IPS. To navigate these menus:

  1. Use the LEFT and RIGHT cursor arrows to select a tab.
  2. Press ENTER to open the tab.
  3. If the selected tab contains sub-tabs, use the cursor arrows, then press ENTER to select the sub-tab you want. Press ENTER again to open the sub-tab.

     

    note: In the tabbed menus for parameters and settings, and in the ALARM VIEWER section of the Alarm / Messages display, you can type the number of a parameter, setting, or alarm that you want to view, then press the UP or DOWN cursor arrow to view it.

     

  4. Press CANCEL if you want to close a sub-tab and return to the higher tab level.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback