Setting/Graphic Display Function

Classic Control - Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Press SETTING/GRAPHIC until you see the Setting shows. Settings change the way the mill behaves; refer to the “Settings” section for a more detailed description.

To use Graphics mode, press SETTING/GRAPHIC until you see the Graphics screen. Graphics shows a visual dry run of your part program without the need to move the axes and risk tool or part damage from programming errors. This function is more useful than the Dry Run mode, because you can check all of your work offsets, tool offsets, and travel limits before running the machine. The risk of a crash during setup is greatly reduced. Refer to Graphics Mode for a more detailed description.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback