Setting Part Zero for the Z-axis (Part Face)

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Your CNC control programs all move from Part Zero, a user-defined reference point. To set Part Zero:

  1. Press MDI/DNC to select Tool #1.
  2. Enter T1 and press TURRET FWD.
  3. Jog X and Z until the tool just touches the face of the part.
  4. Press OFFSET until the Work Zero Offset display is active. Highlight the Z Axis column and G-code row that you want to use (G54 recommended).
  5. Press Z FACE MEASURE to set part zero.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback