Setting 32 — Coolant Override

Next Generation Control Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

This setting controls how the coolant pump operates. When Setting 32 NORMAL, you can press COOLANT, or you can use M-codes in a program, to turn the coolant pump on and off.

When Setting 32 is OFF, the control gives the message FUNCTION LOCKED when you press COOLANT. The control gives an alarm when a program commands the coolant pump on or off.

When Setting 32 is IGNORE, the control ignores all programmed coolant commands, but you can press COOLANT to turn the coolant pump on or off.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.