How To>Setting 221 - Tailstock Diameter - Lathe

Setting 221 - Tailstock Diameter - Lathe

Setting 221 - Tailstock Diameter

Diameter of the tailstock‚Äôs live center measured in inch or metric (depending on Setting 9), times 10,000. Used for the Live Image only. Default value is 12500 (1.25"). Use positive value only.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.