Sequential Serial Number Engraving (G47 P1)

Classic Control - Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

This method is used to engrave numbers on a series of parts with the number being increased by one each time. The # symbol is used to set the number of digits in the serial number. For example, G47 P1 (####), limits the number to four digits while (##) would limit the serial number to two digits.

note: Engraving along an arc is not supported.

This program engraves a four digit serial number.

% O00037 (SERIAL NUMBER ENGRAVING) ; T1 M06 ; G00 G90 G98 G54 X0. Y0. ; S7500 M03 ; G43 H01 Z0.1 ; G47 P1 (####) X2. Y2. I0. J0.5 R0.05 Z-0.005 F15. E10. ; G00 G80 Z0.1 ; M05 ; G28 G91 Z0 ; M30 ; %

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback