RS-232

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

RS-232 is one way to connect the Haas CNC control to a computer (PC). This feature lets you upload and download programs, settings, and tool offsets from a PC.

You need a 9-pin to 25-pin null modem cable (not included) or a 9-pin to 25-pin straight Through cable with a null modem adapter to link the CNC control with the PC. There are two styles of RS-232 connections: the 25-pin connector and the 9-pin connector. The 9-pin connector is more commonly used on PCs. Plug the 25-pin connector end into the connector on the Haas machine located on the side panel of the control cabinet at the back of the machine.

note: Haas Automation does not supply null modem cables.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback