Renumber By Tool

Classic Control - Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

This command searches the program for T (tool) codes, highlights all the program code up to the next T-code, and renumbers the N-code (line numbers) in the program code.

  1. Select the RENUMBER BY TOOL command from the MODIFY pop-up menu category.
  2. For each T-code found, answer the prompt Renumber (Yes/No/All/Cancel)? If you answer A, the process will continue as if you pressed Y for each T-code. The prompt will not appear again during this operation.
  3. Enter the starting N-code number.
  4. Press ENTER.
  5. Enter the N-code increment.
  6. Press ENTER.
  7. Answer Resolve outside references (Y/N)? with Y to change outside code (like GOTO line numbers) with the proper number, or N to ignore outside references.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback