Q Option Example:

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue
G32 X-1.99 Z-2. Q60000 F0.2 (60 degree cut) ; G32 X-1.99 Z-2. Q120000 F0.2 (120 degree cut) ; G32 X-1.99 Z-2. Q270123 F0.2 (270.123 degree cut) ;

The following rules apply to the use of Q:

  1. The start angle (Q) is not a modal value. It must be specified every time it is used. If no value is specified then a zero (0) angle is assumed.

  2. The angle of threading increment is 0.001 degrees. Do not use a decimal point. A 180° angle must be specified as Q180000 and a 35° angle as Q35000.

  3. The Q angle must be entered as a positive value from 0 to 360000.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback