VMC, HMC - Accessory Tooling Block (ATB) - Installation

AD0363 Rev A

VMC, HMC - Accessory Tooling Block (ATB) - Installation

This procedure tells you how to install the Accessory Tooling Block (ATB) option.

Prerequisites

Use P/N 20-7265D for machines without Programmable Coolant (P-Cool). Use P/N 20-7277 for machines with P-Cool.

Parts Included

20-7265D
QTY: 1
SPINDLE TOOLING BLOCK, WITH COOLANT
20-7277
QTY: 1
SPINDLE TOOLING BLOCK, WITHOUT COOLANT

Step 1

Do this step for machines with P-Cool.

Remove the plug [1] for the coolant ring.

Install the ATB [2] with the (2) 10-32 x 1/2" socket-head cap screws [SHCS].

Install the elbow fitting [3] for the coolant ring.

Install the elbow fitting [4] for the ATB.

Connect the hose [5] to the (2) elbow fittings.

Step 2

Do this step for machines without P-Cool.

Remove the plug [2] for the coolant ring.

Install the ATB [2] with the (2) 10-32 x 1/2" socket-head cap screws [SHCS].

Install the elbow fitting [3] for the coolant ring.

Install the elbow fitting [4] for the ATB.

Connect the hose [5] to the (2) elbow fittings.

Step 3

Do this step for machines with a 50-Taper Spindle.

Remove the plug [1] for the coolant ring.

Install the ATB [2] with the (2) 10-32 x 1/2" socket-head cap screws [SHCS].

Install the elbow fitting [3] for the coolant ring.

Install the elbow fitting [4] for the ATB.

Connect the hose [5] to the (2) elbow fittings.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback