TSC-300 - Canister Filter - Maintenance

Applies to machines built from: 
December, 1997 to March, 2015

TSC - 300 PSI - Canister Filter - Maintenance

Contaminants in the Through-Spindle Coolant (TSC) canister filter can cause low coolant flow through the spindle. This document tells you how to replace the filter in the TSC canister filter.

Loosen the retainer ring [1]. Remove the filter canister [2]. Remove the filter element.

Replace the filter.

Install the filter canister [2]. Tighten the filter canister retainer ring [1].

Parts Included

58-6046
QTY: 1
FILTER, TSC ELEMENT 20 MICRON

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback