Standard Coolant – Filter - Cast-Aluminum - Replacement

Applies to machines built from: 
December, 2015
AD0323 Rev A

Coolant - Cast-Aluminum Filter Assembly - Replacement

Do this procedure on a machine that has a cast filter assembly for the standard coolant system.
Push POWER OFF.

 

 

Remove the plug [1] from the bottom left-hand port on the used coolant filter assembly. Let the coolant drain out.

Remove all of the hoses [2].

Remove the (2) button head cap screws [3] and the used coolant filter assembly.

Install the new coolant filter assembly. Use (2) button head cap screws.

Attach the plug [1] to the bottom left-hand port. Connect the hoses.

Push POWER ON.

Operate the pump. Make sure the coolant filter assembly has no leaks.

 

 

Parts Included

93-2356
QTY: 1
FILTER, STANDARD COOLANT HEAD/BOWL REPLACEMENT KIT

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback