Accessories - VMC, ST/DS Lathes, EC 1600 - Tool Rack - Installation

Applies to machines built from: 
January, 2014
AD0110 Rev G

VMC, ST/DS Lathes, EC 1600 - Tool Rack - Installation

This procedure tells you how to install the tool rack. The AIRGUN SADDLE [B] is delivered attached to the AIRGUN SADDLE BRACKET [C].

Machine Compatibility

Do this procedure for these machines:
  • All VMCs
  • ST/ DS lathes
  • EC 1600

Parts Included

KIT PN: 30-11526A, AIR GUN TOOL RACK ASSY. QTY: 1
[A]
25-10324
QTY: 1
PENDANT TOOL RACK
[B]
28-0145
QTY: 1
SADDLE, AIRGUN
[C]
25-10438B
QTY: 1
MTG BRKT TOOL RACK TO SADDLE
[D]
40-0221
QTY: 5
BOLT, BHCS 10-32 X 1/2 TORX SST
[E]
46-1701
QTY: 7
NUT, 10-32 NYLON LOCK
[F]
40-1980
QTY: 2
BOLT, BHCS 1/4-20 X 1/2 ZINC PLATED

Step 1

Do this step for all VMCs and all ST/DS lathes.

Remove the paper [1] from the foam tape.

Find the bolts [2] below the pendant glove box.

Install the TOOL RACK [A] on the glove box bolts. Use (4) NUTS [E] to tightly attach the rack.

Use (3) BUTTON HEAD CAP SCREWS (BHCS) [D] and (3) Nuts [E] to install the AIRGUN SADDLE BRACKET [B,C] on the TOOL RACK [A].

Step 2

Do this step for EC1600s.

Cut the holes [1] on the foam tape.

Remove the paper [2] from the foam tape.

Install the TOOL RACK [A] on the pendant. Use (2) SCREWS (BHCS) [F] to tightly attach the rack.

Use (3) SCREWS (BHCS) [D] and (3) NUTS [E] to install the AIRGUN SADDLE BRACKET [B,C] on the TOOL RACK [A].

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback