Probe Example

Next Generation Control Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

You can use a probe to check your part for correct dimensions during the machining process. For example, this program uses the work probe to check for squareness. The program uses G65 to call 9XXXXX macro programs created specifically for probing. You can find more information on these programs in the Renishaw manuals on the web at diy.haascnc.com.

The program does the following:

  1. After a tool change, home, and adding tool length compensation, the system turns on the work probe and moves to a safe start location.
  2. The probe stylus moves adjacent to the surface at the required Z-Axis point to provide a central start position [1].
  3. The cycle makes two measurements, symmetrically about the start position, to establish the surface angle [2], [3].
  4. Finally, the probe stylus moves to its safe out position, tuns off the probe, and returns home.

Check for Square: [1] Safe Move Position, [2] First Measurement, [3] Second Measurement

Example:

% O00010 (CHECK FOR SQUARE) ; T20 M06 (PROBE) ; G00 G90 G54 X0. Y0. ; G43 H20 Z6. ; G65 P9832 (WORK PROBE ON) ; G65 P9810 Z-0.5 F100. (SAFE MOVE) ; G65 P9843 Y-0.5 D0.5 A15. (ANGLE MEAS.) ; G65 P9810 Z6. F100. (SAFE OUT) ; G65 P9833 (WORK PROBE OFF) ; G00 G90 G53 Z0. ; M01 ; ; ; ( PART PROGRAM ) ; G00 G90 G54 X0. Y0. ; T2 M06 (1/2" END MILL) ; G00 G90 G43 H02 Z1.5 ; G68 R#189 ; G01 X-2. F50. ; M30 ; %

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback