Manage Tools in a Group

Next Generation Control Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

To add, change, or delete a tool in a group:

  1. Highlight the group you want to work with in the ALLOWED LIMITS table.
  2. Press F4 to switch to the TOOL DATA table.
  3. Use the cursor arrow keys to highlight an empty row.
  4. Type an available tool number between 1 and 200.
  5. Press ENTER.
  6. To change a tool number assigned to a group, use the cursor keys to highlight the tool number you want to change.
  7. Type a new tool number.
    note: You can type 0 if you want to delete the tool from the tool group.
  8. Press ENTER.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback