Maintenance Settings

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Settings 167-186 control the default maintenance interval for each maintenance item. The Maintenance Monitor page shows only maintenance items that have a default interval (non-zero).

Maintenance intervals have (3) possible unit values:

  • On-time (hours): The control counts down this interval while the machine power is on.
  • Motion time (hours): The control counts down this interval only while the specified component is in motion.
  • Tool changes (each): The control counts this interval down by (1) after each tool change.

You can change each setting to increase or decrease the default interval. At the end of each maintenance interval, the control will show a MAINTENANCE DUE message and icon. Go to the maintenance monitor page to see the maintenance required.

Maintenance Settings Tab

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback