M61-M65 Clear Optional User M-codes

Next Generation Control Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

M61 through M65 are optional and turn off one of the relays. The M number corresponds to M51 through M55 that turned on the relay. RESET turns off all of these relays. Refer to M21-M25 on page 5 for details on the M-code relays.

The M61 through M68 codes are optional for user interfaces. They turn off one of the relays. Use M51-M58 to turn these on. RESET turns off all of these relays. See M121-M128 for details on the M-code relays.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback