How To>M17 Unclamp APC Pallet and Open APC Door / M18 Clamp APC Pallet and Close APC Door - Mill

M17 Unclamp APC Pallet and Open APC Door / M18 Clamp APC Pallet and Close APC Door - Mill

M17 Unclamp APC Pallet and Open APC Door / M18 Clamp APC Pallet and Close APC Door - CHC ONLY
M17 unclamps the APC pallet and opens the APC door on vertical machining centers with pallet changers. M18 clamps the APC pallet and closes the APC door. M17 / M18 are used for maintenance and test only. Use M50 for pallet changes.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback