Live Image Stock Setup

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Data values for stock and jaw dimensions are stored in the Stock Setup screen. Live Image applies this stored data to each tool.

note: Turn Setting 217 ON (refer to page 5) to show the chuck jaws in the display.

Stock Setup Screen

To enter stock and jaw values:

  1. Press MDI/DNC, then PROGRAM to enter IPS JOG mode.
  2. Use the right/left arrow keys to select the SETUP tab and press ENTER. Use the right/left arrow keys to select the STOCK tab and press ENTER to display the Stock Setup screen. Screens are navigated by using the left/right/up/down arrow keys to navigate through variables. To enter the information requested by a parameter selection, use the number pad, then press ENTER. To exit a screen, press CANCEL.

    The Stock Setup screen displays stock and chuck jaw parameters that are changed to run a particular part.

  3. Once the values are entered press F4 to save the stock and jaw information to the program.
  4. Select one of the choices and press ENTER. The control enters the new lines of code at the cursor. Ensure the new code is entered at the line after the program number.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback