Live Image

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

To bring up the Live Image window (either before or after CYCLE START):

  1. Press CURRENT COMMANDS.
  2. Press PAGE UP until the Live Image window appears.
  3. Press F2 to switch Zoom On/Off (Off shows Currently Zoomed).
  4. Use PAGE UP to zoom out. Use PAGE DOWN to zoom in.
  5. Use LEFT/RIGHT or UP/DOWN cursors to move the zoomed window over the area to be monitored.
  6. Press ENTER to fix zoomed window position and clear the screen to start the graphic where the program is currently running or where you want to view once the program is started.
  7. Screen Shows: Live Image Scale, Currently Running program, Current tool, and Current Offset

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback