Jogging the 4th and 5th Axes

Next Generation Control Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Jogging the rotary axes works like jogging the linear axes: you select an axis and a jog rate, and then you use the jog handle or jog keys to move the axis. In Hand Jog mode, press the +A/C +B or -A/C -B jog key to select the 4th axis. To select the 5th axis, press SHIFT and then +A/C +B or -A/C -B.

The control remembers the last rotary axis you selected, and +A/C +B or -A/C -B continue to select that axis until you select the other axis. For example, after you select the 5th axis as described above, each time you press +A/C +B or -A/C -B selects the 5th axis for jogging. To select the 4th axis again, press SHIFT and then +A/C +B or -A/C -B. Now, each subsequent press of +A/C +B or -A/C -B selects the 4th axis.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback