Horizontal Mill Overview

Next Generation Control Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

The following figures show some of the standard and optional features of your Haas horizontal mill. Some features are common with the vertical mill.

note: These figures are representative only; your machine’s appearance may vary depending on the model and installed options.

Horizontal Mill Features (EC-1600, front view)

  1. Side Mount Tool Changer SMTC
  2. Control Pendant
  3. Consolidated Air-Lubrication Module (CALM)
  4. Electrical Control Box
  5. Operator Spindle Access Door
  6. Tool Tray
  7. Front Work Table
  8. Work Access Doors
  9. Air Gun Holder
  10. Coolant Tank Assembly (movable)
  11. Dual Chip Conveyor
  12. Enclosure Exhaust System (optional)

A Rotary Control

B Work Access Steps

C Secondary ATC Controls

Detail A

  1. Emergency Stop Button
  2. (Optional)
  3. (Optional)
  4. (Optional)
  5. Rotary Index Button

Detail B

  1. Chain to Enclosure
  2. Floor Anchor Bolt

Secure the work platform with chains to the enclosure or bolts to the floor.

Detail C

  1. Secondary ATC Forward Button
  2. Manual/Automatic Tool Change Switch (enables/disables [1] and [4] buttons)
  3. Emergency Stop Button
  4. Secondary ATC Reverse Button

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.