G71 I.D. Stock Removal Example

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue
note: Make sure the start position of the tool is positioned below the diameter of the part you wish to start roughing out, before you define a G71 on an I.D. with this cycle.

G71 I.D. Stock Removal Example

note: This example program and illustration assume that the workpiece starts with a 0.75" through-hole for the boring bar to enter.
% o60713 (G71 ID ROUGHING) ; (G54 X0 is at the center of rotation) ; (Z0 is on the face of the part) ; (T1 is an ID cutting tool) ; (BEGIN PREPARATION BLOCKS) ; T101 (Select tool and offset 1) ; G00 G18 G20 G40 G80 G99 (Safe startup) ; G50 S1000 (Limit spindle to 1000 RPM) ; G97 S500 M03 (CSS off, spindle on CW) ; G00 G54 X0.7 Z0.1 (Rapid to clear position) ; M08 (Coolant on) ; (BEGIN CUTTING BLOCKS) ; G71 P1 Q2 U-0.01 W0.002 D0.08 F0.01 (Begin G71) ; (Negative U indicates ID roughing) ; N1 G00 X4.1 Z0.1 (P1 - Begin toolpath) ; G01 Z0 ; X3. ,R.25 F.005 ; Z-1.75 ,R.5 ; X1.5 ,R.125 ; Z-2.25 ,R.125 ; X.75 ,R.125 ; Z-2.375 ; N2 X0.73 (Q2 - End of toolpath); G70 P1 Q2 ; (BEGIN COMPLETION BLOCKS) ; G00 G53 X0 M09 (X home, coolant off) ; G53 Z0 M05 (Z home, spindle off) ; M30 (End program) ; %

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback