G10 Set Offsets (Group 00)

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

G10 Set Offsets (Group 00)

G10 lets you set offsets within the program. G10 replaces manual offset entry (i.e. Tool length and diameter, and work coordinate offsets).

L - Selects offset category.
  • L2 Work coordinate origin for COMMON and G54-G59

  • L10 Geometry or shift offset

  • L1 or L11 Tool wear

  • L20 Auxiliary work coordinate origin for G110-G129

P - Selects a specific offset.
  • P1-P50 - References geometry, wear or work offsets (L10-L11)

  • P51-P100 - References shift offsets (YASNAC) (L10-L11)

  • P0 - References COMMON work coordinate offset (L2)

  • P1-P6 - G54-G59 references work coordinates (L2)

  • P1-P20 G110-G129 references auxiliary coordinates (L20)

  • P1-P99 G154 P1-P99 reference auxiliary coordinate (L20)

Q - Imaginary tool nose tip direction
R - Tool nose radius
*U - Incremental amount to be added to X-axis offset
*W - Incremental amount to be added to Z-axis offset
*X - X-axis offset
*Z - Z-axis offset

* indicates optional

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback