Function Keys

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue
Name Key Function
Reset RESET Clears alarms. Sets overrides to default values.
Power up/Restart POWER UP/RESTART Sends the axes to their home positions. Clears alarm 102. Displays Current Commands page.
Auto Off AUTO OFF Makes a tool change and shuts down the lathe after a specified time.
F1- F4 F1 - F4 These buttons have different functions depending on mode of operation. See the specific mode section for further descriptions and examples.
X Diameter Measure X DIAMETER MEASURE Records X-Axis tool shift offsets on the offset page during part setup.
Next Tool NEXT TOOL Selects the next tool from the turret (usually used during part setup).
X/Z X/Z Toggles between X-axis and Z-Axis jog modes during part setup.
Z Face Measure Z FACE MEASURE Used to record Z-Axis tool shift offsets on the offset page during part setup.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback