File Numerical Control (FNC)

Classic Control - Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

You can run a program directly from its place on your network or from a storage device, such as a USB drive. From the Device Manager screen, highlight a program on the selected device and press SELECT PROGRAM.

You can call subprograms in an FNC program, but those subprograms must be in the same file directory as the main program.

If your FNC program calls G65 macros or aliased G/M subprograms, they must be in MEMORY.

caution: You can edit subprograms while the CNC program runs. Be careful when you run an FNC program that might have changed since the last time it ran.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback