Example Program

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue
% o51120 (CARTESIAN INTERPOLATION) ; (G54 X0 Y0 is at the center of rotation) ; (Z0 is on face of the part) ; (T1 is an end mill) ; (BEGIN PREPARATION BLOCKS) ; T101 (Select tool and offset 1) ; G00 G20 G40 G80 G97 G99 (Safe startup) ; G17 G112 (Call XY plane, XY to XC interpolation) ; G98 (Feed per min) ; M154 (Engage C-Axis) ; G00 G54 X2.35 C0. Y0. Z0.1 ; (Rapid to 1st position) ; P1500 M133 (Live tool CW at 1500 RPM) ; M08 (Coolant on) ; (BEGIN CUTTING BLOCKS) ; G0 X-.75 Y.5 ; G01 X0.45 F10. (Point 1) ; G02 X0.5 Y0.45 R0.05 (Point 2) ; G01 Y-0.45 (Point 3) ; G02 X0.45 Y-0.5 R0.05 (Point 4) ; G01 X-0.45 (Point 5) ; G02 X-0.5 Y-0.45 R0.05 (Point 6) ; G01 Y0.45 (Point 7) ; G02 X-0.45 Y0.5 R0.05 (Point 8) ; G01 X0.45 Y.6 (Point 9) ; (BEGIN COMPLETION BLOCKS) ; G113 (Cancel G112) ; M155 (Disengage C axis) ; M135 (Live tool off) ; G18 (Return to XZ plane) ; G00 G53 X0 M09 (X home, coolant off) ; G53 Z0 (Z home) ; M30 (End program) ; %

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.